Access Point Not Passing DHCP To Clients
We just recently got a pair of these APs for our office and the boss flashed them with 4.1.0.14 before we did anything, and we're having the exact same issue. If I static IP my clients they're fine....
View ArticleAccess Point Not Passing DHCP To Clients
We are having the same issue, 8600AP doesn't give out ip addresses and a reboot temporarily fixes it. I updated one of the APs to firmware 4.0.1.14 and now our controller won't recognize it. We are...
View ArticleAccess Point Not Passing DHCP To Clients
Hi Leon,depending on the firmware update to the AP's, you need to update the 3024 to be compatible,sounds like your AP firmware is too far ahead of the 3024's.There is a menu bar underneath the graphic...
View ArticleRe: Access Point Not Passing DHCP To Clients
Hi! Did anyone here ever get this resolved? I'm on 4.1.0.14_b17 firmware on my 8600APs and they act up like this, not handling load well. Clients are all macs and get no ip from time to time with...
View ArticleRe: Access Point Not Passing DHCP To Clients
In fact we had the Dlink guys come down and take a look, they suggested upgrading the switch to a DWS-3160 so we could get the latest firmware on the access points, which we did. The switch now has...
View ArticleAccess Point Not Passing DHCP To Clients
Upon recommendation from DLink, upgraded the DWS-3160 Firmware to Build 4.3.1.3. Still having the same issues. Will keep you informed of progress.
View ArticleRe: Access Point Not Passing DHCP To Clients
I am seeing the same issues. It's got to be fixed.
View ArticleRe: Access Point Not Passing DHCP To Clients
Ok...this is driving be batty. I have the same issue going on, except it seems to be isolated to mobile devices, specifically ipads. None of my computers on the network (we have a lot of them) have had...
View ArticleRe: Access Point Not Passing DHCP To Clients
Same problem but found a workaround.I am using Cisco A/P's but the router (and DHCP server) is from my internet provider and can't be replaced as it includes the modem as well. For this reason I...
View ArticleRe: Access Point Not Passing DHCP To Clients
I have been having issues with users on my wireless network constantly dropping out and when you try to connect it say 'cannot connect to this network'.I have upgraded from 4.1.0.11 to 4.2.0.9 and...
View ArticleAccess Point Not Passing DHCP To Clients
I see just question i dont see answers please can i get answers from the older post.People had same issues by 2014 what worked?
View ArticleAccess Point Not Passing DHCP To Clients
Hi! You create a loopback interface on DWS switch (LAN -> L3 -> Loopback Configuration)?? Try also configure DHCP relay (LAN -> L3 -> BOOTP/DHCP Relay Agent Configuration).
View ArticleAccess Point Not Passing DHCP To Clients
Hi Alex, I already created the switch as dhcp relay but it didn't work so i reverted. Is loop-back config on the wireless controller switch? I have also increased the dhcp pool....problem is few people...
View ArticleAccess Point Not Passing DHCP To Clients
Only way we could regain some sort of connectivity was to downgrade to 3.0.16
View ArticleAccess Point Not Passing DHCP To Clients
Try this my friend, have some trable, and with Ukraine specialisy from Dlink create new firmwarehttp://ftp.dlink.ru/pub/Switch/DWS-3000%20Series/Firmware/3.0.0.23/DWS-302x_FW_v3_0_0_23.opr Opens a new...
View ArticleRe: Access Point Not Passing DHCP To Clients
Folks,I believe that the principal reason for the problem is a setting on these access points (and on most brands) that limits broadcast traffic. I have several Dlink 6600APs exhibiting the same issue:...
View ArticleRe: Access Point Not Passing DHCP To Clients
Same problem here, the model is DIR-615L.There ''re several modes in my router, one of which is "Access Point mode", and it just drops all my DHCP packets.Anther modes is "Wireless Router", which works...
View ArticleAccess Point Not Passing DHCP To Clients
tonyforward wrote:Folks,I believe that the principal reason for the problem is a setting on these access points (and on most brands) that limits broadcast traffic. I have several Dlink 6600APs...
View Article
